Groundwork

  • Excavation of trenches for foundation strips - groundwork is carried out mechanically with manual finishing according to the parameters specified in the project documentation
  • The building pit for the underground garage is designed as an open and un-sheeted one
  • The excavated material is removed and deposited based on the site location, quality of the excavated material and the required quantity of soil for landscaping

Substructure

  • Protection of the foundation base before the lying down the substructure will be ensured according to the current building conditions, usually, it is made with a layer of gravel
  • The foundation strips are made of plain concrete complemented with foundation walls made of vibro concrete blocks filled with concrete mixture, structurally reinforced with horizontal reinforcement at the joints, wherever the height exceeds 750 mm
  • A monolithic reinforced concrete base plate for the underground garage

Substructure

  • Protection of the foundation base before the lying down the substructure will be ensured according to the current building conditions, usually, it is made with a layer of gravel
  • The foundation strips are made of plain concrete complemented with foundation walls made of vibro concrete blocks filled with concrete mixture, structurally reinforced with horizontal reinforcement at the joints, wherever the height exceeds 750 mm
  • A monolithic reinforced concrete base plate for the underground garage

Horizontal structures

  • Compacted gravel sub-base
  • Reinforced concrete base plate
  • Radon barrier and waterproofing
  • Thermal insulation of the floor structure on the ground floor
  • Thermal insulation separation layer
  • Self-levelling lightweight screed
  • Floor finish
  • The suspended ceiling is a combination of plasterboard ceiling and/or plaster on ceramic ceiling
  • Ceiling bearing structure - ceramic ceiling with reinforced concrete ribs
  • Self-levelling lightweight screed
  • Soft fibreboard
  • Impact sound insulation - Wolf Professional acoustic panels
  • Insulation layer in bathrooms
  • Floor finish
  • The lintels over the doors and windows in supporting and enclosing structures will be reinforced structures in the form of reinforced concrete rings or system lintels
  • Lintels over doors and windows in partitions - system lintels
  • Concrete
  • Reinforcement
  • Thermal insulation of the reinforced concrete ring beam integrated in the facade insulation
  • The bearing structure of the gallery will be made of wooden profiles
  • The gallery ceiling will be made as plasterboard suspended ceiling
  • The flooring will be made as a multilayer floating wooden floor - oak
  • Railing – plain vertical railing/posts, profiled handrail
  • Bearing structure made of reinforced concrete projecting beams
  • The floor finish is made of wooden floorboards on flexible pads
  • The railing is formed by squared bearing posts and forged iron rods
  • The house gallery is covered with a sloping roof with ceramic or concrete roof cladding
  • Bearing structure made of reinforced concrete projecting beams
  • The floor finish is made of wooden floorboards on flexible pads
  • The railing is formed by bearing posts and forged iron rods
  • The partitions between the adjacent balconies are made as a galvanized steel frame structure with lightweight panels made of wooden planks or imitation wood planks
  1. 1
    Design and composition of the floor structure on the ground floor
  2. 2
    Design and composition of the ceiling structure
  3. 3
    Lintels over doors and windows
  4. 4
    Reinforced concrete ring beam
  5. 5
    Construction of the inner gallery of loft apartments
  6. 6
    Construction of the loft apartment gallery
  7. 7
    Balcony construction

Vertical structures

  • Vertical supporting/filling perimeter masonry
    Brick such as Porotherm 24 P+D with 140 mm polystyrene facade insulation
  • Interior medium bearing masonry
    • Brick such as Porotherm 24 P+D
    • Walls between apartments - brick such as Porotherm AKU 25, AKU 30
    • Reinforced concrete monolithic walls or pillars
  • Partition masonry
    • Partitions on the ground floor and 1st floor: partition brick, such as Porotherm th. 75mm, 115 mm, 140 mm
    • Partitions in the loft: partition brick, such as Porotherm th. 75mm, 115 mm, 140 mm, plasterboard partitions

Vertical structures

  • Vertical supporting/filling perimeter masonry
    Brick such as Porotherm 24 P+D with 140 mm polystyrene facade insulation
  • Interior medium bearing masonry
    • Brick such as Porotherm 24 P+D
    • Walls between apartments - brick such as Porotherm AKU 25, AKU 30
    • Reinforced concrete monolithic walls or pillars
  • Partition masonry
    • Partitions on the ground floor and 1st floor: partition brick, such as Porotherm th. 75mm, 115 mm, 140 mm
    • Partitions in the loft: partition brick, such as Porotherm th. 75mm, 115 mm, 140 mm, plasterboard partitions

Roofing

  • The building will be covered with a hipped roof
  • Ceramic tile or concrete tile cladding
  • Over rafter thermal insulation system
  • Truss construction – combination of glued and squared beams
  • Construction of plasterboard suspended ceilings with partially visible truss structure

1

Windows and doors

  • Windows
    Plastic windows, double-sided oak tree imitation foil, double insulation glazing with U =1.1 W/m2.K
    Skylights, such as “VELUX“, double insulation glazing with U =1.1 W/m2.K
  • Entrance doors
    Plastic security door, oak wood imitation double-sided foil
  • Interior doors
    Solid and partially glazed interior doors fitted in casing door frames
    Finish – oak, beech veneer
    Fittings – chrome
  • 2
  • 3
  • 4
  • 14

Windows and doors

  • Windows
    Plastic windows, double-sided oak tree imitation foil, double insulation glazing with U =1.1 W/m2.K
    Skylights, such as “VELUX“, double insulation glazing with U =1.1 W/m2.K
  • Entrance doors
    Plastic security door, oak wood imitation double-sided foil
  • Interior doors
    Solid and partially glazed interior doors fitted in casing door frames
    Finish – oak, beech veneer
    Fittings – chrome

Surface finish

  • Exterior plaster
    Exterior thin-layer plaster with facade painting
  • Interior plaster
    Walls - gypsum plaster with painting
    Ceiling - gypsum plaster with painting / plasterboard suspended ceiling with installation gap
  • Floor tiling
    • Non-calibrated ceramic tiles
    • In the common corridor, pram room
    • internal and external staircase in common areas
  • 5
  • 6
  • 7
  • 8

Plumbing elements

Parapet gutters, flashings of dormers and above-roof components made of titanium zinc or copper
Exterior window sills are of system type, made of plastic, or aluminium sheet metal

  • 9
  • 10

Technical equipment – installations

  • Water pipeline
    Plastic distribution lines Water pipeline with an exterior tap to the garden in the apartments with front gardens
  • Sewer system
    PVC HT, KG piping
  • Heating
    • Gas boiler independent of the indoor environment, with an integrated hot water tank
    • Indoor thermostat in the living room
    • Heating system
    • Panel radiators RADIK
  • Electrical installations
    • Cabling – Cu
    • Sockets and switches – TANGO – white
    • An outlet for a ceiling light in each room
    • Plastic switchboard in the entrance hall
    • A joint socket for an aerial and a telephone land line in the living room
    • Intercom in the entrance hall - connected to the entrance gate, or to the front door
    • Exterior sockets on the facade facing the garden in the apartments with front gardens

Technical equipment – installations

  • Water pipeline
    Plastic distribution lines Water pipeline with an exterior tap to the garden in the apartments with front gardens
  • Sewer system
    PVC HT, KG piping
  • Heating
    • Gas boiler independent of the indoor environment, with an integrated hot water tank
    • Indoor thermostat in the living room
    • Heating system
    • Panel radiators RADIK
  • Electrical installations
    • Cabling – Cu
    • Sockets and switches – TANGO – white
    • An outlet for a ceiling light in each room
    • Plastic switchboard in the entrance hall
    • A joint socket for an aerial and a telephone land line in the living room
    • Intercom in the entrance hall - connected to the entrance gate, or to the front door
    • Exterior sockets on the facade facing the garden in the apartments with front gardens

Paved areas

The entire area of the courtyard incl. pavements and car parks (parking spaces) - traffic area made of interlocking paving

ABOVE STANDARD

At your request we can make the repair of any complexity, order an atypical furniture, including the preparation of individual interior design. Changes in the standards will be evaluated additionally.

Our partners:

The project partner is the company PK INTERIORS, that help in case of your interest to offer interior design and production of atypical custom furniture.

Company SASA interior specialize in joinery with the orientation of kitchen and flat interior. Company implement for clients of our project complete services from 3D design to realization.

ABOVE STANDARD

At your request we can make the repair of any complexity, order an atypical furniture, including the preparation of individual interior design. Changes in the standards will be evaluated additionally.

Our partners:

The project partner is the company PK INTERIORS, that help in case of your interest to offer interior design and production of atypical custom furniture.

Company SASA interior specialize in joinery with the orientation of kitchen and flat interior. Company implement for clients of our project complete services from 3D design to realization.

Nautila Logo

Architect's word

Homestead adaptation no. 508 for dwelling project in Hrnčíře

Homestead Šeberov new building - part "A", "B", "C" located in the immediate proximity of St. Prokop´s church in Hrnčíře reminding not so distant trace of history as the church. Together contribute to creating the urban focus of the former municipality of Hrnčíře. As a result of development of municipality as well as the social development, the agricultural use of the former economic yard disappeared over successive changes of usage and demolition in the end. However, Homestead Šeberov new building remind spatial generosity and yard dignity with its historical atmosphere. The atmosphere and the imprint of history which were succeed in creating this project for us, u can see in details as well as the whole determine principle of the new project which give the place a new energy and life. Non-functional, damaged original structures were demolished and cleared away and that all were replaced with modern ones, of course observing contemporary requirements on high-quality building - friendly to the environment and economical as far as energy consumption is concerned.

Compared with contemporary residential projects in Prague, this new residential yard is unique not only due to its location but also in the way how the new building define neighbourly living in original ground plan of former historical building: closed dwelling with central entrance to the yard of which purpose is not the stabling of horses and wagons, but quite unobtrusive "stabling" of the residents' cars - both outside and underground. From that yard, there are all apartments accessible with the space offering opportunities for neighbour´s chat or to check discreetly and spontaneously any strangers coming in. As all apartment´s entrances are oriented to one central space, they are all open to the outside with a view of the greenery of Hrnčíře which is another private side of this residential project.

Generous layout of all the apartments, preserving privacy in combination with a spontaneous identification with a single entrance - one address - one yard, genius loci of the place and a number of historical elements of this type of building, all of which create prerequisites for a high-quality residential environment with a unique character and atmosphere.

ing.arch. Petr Marušiak, NAUTILA ARCHITEKTI s.r.o.